Three tying methods in one system
The sytems integrated Combi tie of using any of the following tying methods and flexibly changing from one to another:
All-plastic facing alkus, no swelling or shrinking
Easy repair of scratches or drill holes etc. on site with the same polypropylene material
Screwable and nailable without chipping off of top layer
The alkus facing lasts as long as the Frame
The Combi tie is built into the frame, i.e. no protruding or loose parts. No conversions, modifications or add-ons required when switching from one to twosided tieing.
You save the articulated flange nut on one side entirely, the number of parts is reduced by 50%.
Selbstsichernder Parkpositions-Halter für Zubehör und angeschweißter Klemmhalter für Schalschlösser. Das Zubehör bleibt beim Umsetzen am Element. Kein extra Lagern, Suchen oder Transportieren des Zubehörs nötig.
Panels are aligned and joined firmly with the MEVA clamp, closed by just a few hammer blows. The clamp fits anywhere on the frame, thus enabling safe tieing even in offset position. It has no losable parts
The bump notch on large panels allows you to easily move the them into their final position
MEVA pouring platforms, walkway brackets and comprehensive safety accessories make your concrete pours safer and faster. The pouring platform is simply swung into position on the AluStar, StarTec, Mammut or Mammut 350 wall formwork panels.
Circo is a robust steel system with integrated hinge joints for circular columns. It is available in 5 cm steps from 25 to 80 cm and in heights of 50, 100 and 300 cm. The two shells are closed using the standard M clamp.
Modular system for heavy duty bracing. The brace lengths are variable and can be used to support and align high walls and columns beyond 6 m heights.
MEVA foldable working and climbing platform. It is delivered to the site folded and pre-assembled and can be used as a climbing platform.
Heavy-duty wall formwork. Large panel size 3.50 high, 2.50 width footprint. 100 kN/m² concrete load capacity throughout the system.
MEVA FormSet anchors for single-sided formwork, stop end rail and stop end bracket for slab edges and cantilevering slabs with safety mesh for slab edge fall protection
Push-pull props R and bracing brackets SRL are used to align and support wall formwork. Push-pull props SRL have left- and right threaded spindles. The brace bracket 250 consist of a push-pull-prop R 250 (190 - 320 cm) and bracing bracket SRL 120 (90 - 150 cm).
Radius is the state-of-the-art circular wall formwork systems for all round walls from a radius of 250 cm upwards. It is compatible with the Mammut 350 wall formwork system and is joined using the same M formwork clamp. It has a sturdy 6 mm steel facing for a superior concrete finish. Its benefits are very quick, easy assembly and the easy selection of any radius. Box outs are aligned using high-performance magnets. Predestined for architectural requirements.
Comprehensive, modular safety system for MEVA wall wall formwork systems. Easy, standard attachment to the multi-function profile. Baukastensystem mit Betonierbühne, Rückenschutz, Frontgeländer und Durchstiegsluke mit Leiter und Stirngeländer. Befestigung an der Funktionsstrebe des Wandschalungssystems. Richtkonsolen am Rücken der Laufkonsole, dadurch keine Unterbrechung der Arbeitsbühne.
Heavy-duty support frame for single-sided walls beyond 12 m high. The basic unit fits on any truck. Support frame STB 300, can also be used horizontally.