The sturdy multi-purpose wall formwork system per se. Large panel sizes up to 3.30 m, 100 % compatible with the hand-set system AluStar. Over 30 years proven track record in civil engineering and commercial and residential construction. For sale and rental. Available also from authroized MEVA partners.
Panel heights 330, 270, 135 and 90 cm, panel widths from 240 to 20 cm; for vertical or horizontal use
90° and 135° inside and outside corners and steplessly adjustable articulated corners from 60° to 180°
Maximum load capacity is 70 kN/m² (German standard DIN 18218, table 3, line 7)
Frames made of closed high-strength steel profiles
High-quality powder coating with additional priming and cavity sealing
270 cm and 135 cm wide panels with bump notch
Practical MEVA multi-function profile with welded-in Dywidag nuts
Tie hole with conical steel sleeve, welded in from both sides
3 tie holes per panel height 330 cm, 2 per height 270 cm, 1 per height 135 and 90 cm; symmetrical Arrangement
Panel 270/240 with tie holes inside panel; panel height 135 cm with centred tie hole at top and bottom
Panel connection with compact developed assembly lock: one piece, weighs only 2,0 kg
All-plastic facing alkus, no swelling or shrinking
Easy repair of scratches or drill holes etc. on site with the same polypropylene material
Screwable and nailable without chipping off of top layer
The alkus facing lasts as long as the Frame
As Qatar’s population and economy keep growing and water demand is increasing, the Qatar General Electricity & Water Corporation (KAHRAMAA) has launched an ambitious water project to provide increased water storage capacities and extend the supply reserve of drinking water from two to seven days.
In Zurich the motorways cross each other from all directions. Every morning and evening in this densely populated region the heavy through and long-distance traffic is joined by commuter traffic.
The STB 450 has often proved its strength when being used vertically to support walls. For a motorway bridge north of Frankfurt it is being used horizontally for the bridge piers.
Putting superlatives on Dubai’s skyline continues with the construction of the Rosemont Hotel and Residences on Sheikh Zayed Road.
Located between Sharjah and Dubai, close to Dubai International Airport, yet close to all amenities – Sahara Tower 6 is a residential tower offering luxury apartments with various bedroom configurations.
Ramps, architectural-concrete walls and ceilings, numerous concrete beams, rectangular and oval columns, rounded outside corners and bevelled inside corners.
MEVA foldable working and climbing platform. It is delivered to the site folded and pre-assembled and can be used as a climbing platform.
MEVA pouring platforms, walkway brackets and comprehensive safety accessories make your concrete pours safer and faster. The pouring platform is simply swung into position on the AluStar, StarTec, Mammut or Mammut 350 wall formwork panels.
Komplett vormontiertes, aufklappbares Sicherheitssystem StarTec-Securit für MEVA Wandschalung StarTec. Mit Betonierbühne, Rückenschutz, Leiter und Durchstiegsluke. Rutschfester Riffelblechbelag.
Comprehensive, modular safety system for MEVA wall wall formwork systems. Easy, standard attachment to the multi-function profile. Baukastensystem mit Betonierbühne, Rückenschutz, Frontgeländer und Durchstiegsluke mit Leiter und Stirngeländer. Befestigung an der Funktionsstrebe des Wandschalungssystems. Richtkonsolen am Rücken der Laufkonsole, dadurch keine Unterbrechung der Arbeitsbühne.
Push-pull props R and bracing brackets SRL are used to align and support wall formwork. Push-pull props SRL have left- and right threaded spindles. The brace bracket 250 consist of a push-pull-prop R 250 (190 - 320 cm) and bracing bracket SRL 120 (90 - 150 cm).
Circo is a robust steel system with integrated hinge joints for circular columns. It is available in 5 cm steps from 25 to 80 cm and in heights of 50, 100 and 300 cm. The two shells are closed using the standard M clamp.
MEVA FormSet anchors for single-sided formwork, stop end rail and stop end bracket for slab edges and cantilevering slabs with safety mesh for slab edge fall protection
Modular system for heavy duty bracing. The brace lengths are variable and can be used to support and align high walls and columns beyond 6 m heights.